Driver sd needs updating please use bustype true dating website

Posted by / 06-Jun-2020 05:01

Driver sd needs updating please use bustype

ACPI: WMI: Mapper loaded pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:0a:00.0: PCI INT A - IRQ 19 r8169 0000:0a:00.0: setting latency timer to 64 r8169 0000:0a:00.0: irq 29 for MSI/MSI-X eth0: RTL8102e at 0xf8452000, :5a:1e:e, XID 24a00000 IRQ 29 sd 2:0:0:0: Attached scsi generic sg0 type 0 sr 5:0:0:0: Attached scsi generic sg1 type 5 input: PC Speaker as /devices/platform/pcspkr/input/input7 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb jmb38x_ms 00.3: PCI INT A - IRQ 17 ehci_hcd 00.2: setting latency timer to 64 ehci_hcd 00.2: EHCI Host Controller ehci_hcd 00.2: new USB bus registered, assigned bus number 1 ehci_hcd 00.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 00.2: debug port 1 ehci_hcd 00.2: irq 17, io mem 0xd2508500 ehci_hcd 00.2: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 00.2: PCI INT B - IRQ 19 ehci_hcd 00.2: setting latency timer to 64 ehci_hcd 00.2: EHCI Host Controller ehci_hcd 00.2: new USB bus registered, assigned bus number 2 ehci_hcd 00.2: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 00.2: debug port 1 ehci_hcd 00.2: irq 19, io mem 0xd2508400 ehci_hcd 00.2: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ath_hal: module license ' Proprietary' taints kernel.AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) HDA Intel 00.2: PCI INT A - IRQ 16 HDA Intel 00.2: setting latency timer to 64 usb 1-6: new high speed USB device using ehci_hcd and address 2 Error: Driver 'pcspkr' is already registered, aborting...Standard SD Host Controller .3 System peripheral: JMicron Technologies, Inc.MS Host Controller .4 System peripheral: JMicron Technologies, Inc.4391.22 Bogo MIPS (lpj=7315565) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: AMD Turion(tm) X2 Dual-Core Mobile RM-74 stepping 01 checking TSC synchronization [CPU#0 - CPU#1]: Measured 214794579 cycles TSC warp between CPUs, turning off TSC clock.Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (8793.07 Bogo MIPS).

PCI: Using ACPI for IRQ routing Net Label: Initializing Net Label: domain hash size = 128 Net Label: protocols = UNLABELED CIPSOv4 Net Label: unlabeled traffic allowed by default hpet: hpet2 irq 24 for MSI Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: Pn P ACPI init ACPI: bus type pnp registered pnp: Pn P ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system : iomem range 0xfec00000-0xfec00fff has been reserved system : iomem range 0xfee00000-0xfee00fff has been reserved system : ioport range 0x400-0x4cf has been reserved system : ioport range 0x4d0-0x4d1 has been reserved system : ioport range 0x4d6-0x4d6 has been reserved system : ioport range 0x680-0x6ff has been reserved system : ioport range 0x77a-0x77a has been reserved system : ioport range 0xc00-0xc01 has been reserved system : ioport range 0xc14-0xc14 has been reserved system : ioport range 0xc50-0xc52 has been reserved system : ioport range 0xc6c-0xc6c has been reserved system : ioport range 0xc6f-0xc6f has been reserved system : ioport range 0xcd0-0xcdb has been reserved system : iomem range 0xe0000-0xfffff could not be reserved system : iomem range 0xfff00000-0xffffffff has been reserved pci 00.0: PCI bridge, secondary bus 00 pci 00.0: IO window: 0x7000-0x7fff pci 00.0: MEM window: 0xd2300000-0xd24fffff pci 00.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff pci 00.0: PCI bridge, secondary bus 00 pci 00.0: IO window: 0x3000-0x6fff pci 00.0: MEM window: 0xd1300000-0xd22fffff pci 00.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff pci 00.0: PCI bridge, secondary bus 00 pci 00.0: IO window: disabled pci 00.0: MEM window: 0xd1200000-0xd12fffff pci 00.0: PREFETCH window: 0x000000b0000000-0x000000b00fffff pci 00.0: PCI bridge, secondary bus 00 pci 00.0: IO window: disabled pci 00.0: MEM window: 0xd1100000-0xd11fffff pci 00.0: PREFETCH window: disabled pci 00.0: PCI bridge, secondary bus 0000:0a pci 00.0: IO window: 0x2000-0x2fff pci 00.0: MEM window: 0xb0100000-0xb01fffff pci 00.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff pci 00.4: PCI bridge, secondary bus 00 pci 00.4: IO window: 0x1000-0x1fff pci 00.4: MEM window: disabled pci 00.4: PREFETCH window: disabled pci 00.0: setting latency timer to 64 pci 00.0: PCI INT A - IRQ 19 pci 00.0: setting latency timer to 64 pci_bus 00: resource 0 io: [0x00-0xffff] pci_bus 00: resource 1 mem: [0x000000-0xffffffff] pci_bus 00: resource 0 io: [0x7000-0x7fff] pci_bus 00: resource 1 mem: [0xd2300000-0xd24fffff] pci_bus 00: resource 2 mem: [0xc0000000-0xcfffffff] pci_bus 00: resource 3 mem: [0x0-0x0] pci_bus 00: resource 0 io: [0x3000-0x6fff] pci_bus 00: resource 1 mem: [0xd1300000-0xd22fffff] pci_bus 00: resource 2 mem: [0xd0000000-0xd0ffffff] pci_bus 00: resource 3 mem: [0x0-0x0] pci_bus 00: resource 0 mem: [0x0-0x0] pci_bus 00: resource 1 mem: [0xd1200000-0xd12fffff] pci_bus 00: resource 2 mem: [0xb0000000-0xb00fffff] pci_bus 00: resource 3 mem: [0x0-0x0] pci_bus 00: resource 0 mem: [0x0-0x0] pci_bus 00: resource 1 mem: [0xd1100000-0xd11fffff] pci_bus 00: resource 2 mem: [0x0-0x0] pci_bus 00: resource 3 mem: [0x0-0x0] pci_bus 0000:0a: resource 0 io: [0x2000-0x2fff] pci_bus 0000:0a: resource 1 mem: [0xb0100000-0xb01fffff] pci_bus 0000:0a: resource 2 mem: [0xd1000000-0xd10fffff] pci_bus 0000:0a: resource 3 mem: [0x0-0x0] pci_bus 00: resource 0 io: [0x1000-0x1fff] pci_bus 00: resource 1 mem: [0x0-0x0] pci_bus 00: resource 2 mem: [0x0-0x0] pci_bus 00: resource 3 io: [0x00-0xffff] pci_bus 00: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs...

net_namespace: 1016 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 15 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Enabling special treatment for EC from MSI.

ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found.

Anyway, I'm attaching what I think is relevant.uname -a:.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge .0 PCI bridge: Hewlett-Packard Company Device 9602 .0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) .0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) .0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) .0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) .0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] .0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller .1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller .2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller .0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller .1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller .2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller .0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) .1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller .2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) .3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller .4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge .0 Host bridge: Advanced Micro Devices [AMD] Family 11h Hyper Transport Configuration (rev 40) .1 Host bridge: Advanced Micro Devices [AMD] Family 11h Address Map .2 Host bridge: Advanced Micro Devices [AMD] Family 11h DRAM Controller .3 Host bridge: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control .4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control .0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] .1 Audio device: ATI Technologies Inc RS780 Azalia controller .0 System peripheral: JMicron Technologies, Inc.

SD/MMC Host Controller .2 SD Host controller: JMicron Technologies, Inc.

driver sd needs updating please use bustype-45driver sd needs updating please use bustype-31driver sd needs updating please use bustype-51

So, I talked to a friend and he suggested it might be since I was running 64 bit.